Understanding NPO: Two Choices That Shape the Module, External vs Internal Laser and Integrated vs Discrete PD
1. Why every NPO conversation ends up being about the light source
Near-Packaged Optics (NPO) has become the star of almost every optical communications show this year. Readers tend to ask three questions:
What exactly is the difference between NPO and CPO?
Which components go inside an NPO module?
Which component suppliers stand to benefit?
The first two have standard answers, but the third is often asked the wrong way. People look for winners by asking who the module maker is, yet two products both labeled 3.2T or 6.4T NPO can carry very different bills of materials. What really shapes an NPO module is two design choices: whether the laser sits outside or inside the module, and whether the photodetector (PD) is built into the silicon photonics chip or added as a separate die.
Combine those two choices and you get four structures. This article walks through them with four figures, so that after reading it you will know which three questions to ask about any NPO headline.
We already covered how each component works (what the Driver, TIA, PD and FAU each do) in our SiPh transceiver primer (in Chinese), so we won't repeat that here; this piece only looks at how they are arranged inside an NPO module.
2. Change the yardstick: NPO is about separability, not speed
Many people think of NPO as "slower CPO" or "an appetizer before CPO". But on speed alone, both NPO and CPO are shipping 3.2T and 6.4T, so that is not where the difference lies.
The difference is whether there is a pluggable interface between the optical engine (OE) and the switch chip:
NPO module = optical engine (PIC + Driver + TIA) + light source + fiber interface + LGA socket
CPO: the optical engine is packaged directly on the switch chip's substrate, so one failed engine can scrap the whole ASIC package.
NPO: the optical engine is a standalone module pressed onto the main board through an LGA socket, right next to the ASIC. If it fails, you pull it out and replace it on its own.
The 3.2T NPO that Alibaba Cloud announced it had powered on in early 2026 is a textbook example. It uses an OIF-standard package, measures only 22.5 mm × 35.1 mm, and is physically and electrically decoupled from the host chip through a standard LGA connector.
This figure shows what an NPO module actually looks like: the optical engine sits on an LGA socket, and three fibers come out of it. Two carry 16-channel transmit and receive signals, and the green one in the middle connects to an ELSFP external laser.

Separability turns every part of an NPO module into a market of its own. That was the core argument of our piece NPO is not an appetizer for CPO (in Chinese): separable architectures create component markets.
On the electrical side, moving the optical engine next to the ASIC also cuts host channel loss sharply. Samtec's figure at the OCP Summit: from about 32 dB for a front-panel pluggable down to about 15 dB. We broke this down in OCP Global Summit 2/6 on NPO's lock-in point (in Chinese).
3. Meet the components inside the module
Let's start with one schematic and identify every component of an NPO module in one pass.
This is the baseline (Variant 1) that every later comparison builds on: the laser sits outside the module and the PD is integrated into the silicon photonics chip. Signals flow left to right: switch chip → PCB traces → LGA socket → optical engine → fiber → front panel.

▲ (Image source: Simple Tech Trend original)
Following the signal path from left to right:
Component | What it does in NPO | One-line takeaway |
Switch ASIC | Outputs high-speed electrical signals | Where the signal starts |
ASIC → NPO traces | A few centimeters of PCB routing, no DSP needed | Shorter means lower power |
LGA socket | Solderless compression contact that makes the module pluggable | The dividing line between NPO and CPO |
mSAP substrate | Module carrier for the optical and electrical chips | Foundation of the optical engine |
Control area | MCU, power management, passives | Management and power |
SiPh PIC | Modulators, waveguides (plus Ge PD in the integrated version) | Main actor for E/O and O/E conversion |
Driver | Drives the modulators | Transmit-side amplifier |
TIA | Turns the PD's tiny current into a voltage | Receive-side amplifier |
FAU | Couples light from the SiPh chip into fiber | Where alignment precision is tested hardest |
Fiber and connectors | Carry signals to the front panel | The exit |
Light source (ELSFP or CoS) | Supplies continuous-wave (CW) light to the modulators | One of the two protagonists of this article |
Now look at a real module from the inside.
This figure shows an NPO module opened up. The back section (top of the image) is a circuit board area, which we believe holds control and power circuits; the front section holds two 16-channel silicon photonics chips, the small gold chips beside them are likely the Driver/TIA, and the front edge carries the fiber array and fiber connector.

According to Alibaba Cloud, the module integrates two 16-channel monolithic silicon photonics transceiver chips with linear-drive Driver/TIA chips, flip-chipping both PICs and EICs onto an mSAP substrate in a mature 2D package, at a typical power of about 20 W.
Compare this photo with the render above: you can see the real chip layout, the metal frame and the fibers leaving the front.

4. Choice one: laser outside or inside?
4.1 Why silicon photonics needs a separate laser
Silicon does not emit light, so the silicon photonics chip's job is modulation: writing the electrical signal onto light. The light itself comes from a separate III-V (InP) CW laser. The only question is where that laser goes.
External (ELSFP): the laser is a standalone pluggable module in the equipment's front panel, sending light into the optical engine over polarization-maintaining fiber (PMF).
Internal (CoS): the laser die is first mounted on a small submount, which is what CoS (Chip on Submount) means, and the CoS assembly is placed on the module substrate right next to the silicon photonics chip, firing light into the chip's edge.
This figure shows the external-laser version inside a full system: the optical engine sits next to the ASIC, an orange polarization-maintaining fiber runs from the engine to the front panel, and the module plugged into the front panel is the ELSFP laser.

NADDOD puts it plainly: its 3.2T NPO optical engine must be used with an ELSFP, which supplies the external light the engine needs for optical-electrical conversion.
4.2 The two approaches produce different modules
This figure differs from Variant 1 in one way: the front-panel ELSFP and its cyan fiber are gone, replaced by a CoS DFB laser on the back edge of each PIC. The module loses a fiber but gains two heat sources.

▲ (Image source: Simple Tech Trend original)
The clearest comparison comes from the Open CPX 1.0 specification, which splits modules into two classes:
ELM (External Laser Module): 17 mm wide, 36–50 mm long.
ILM (Internal Laser Module): 22 mm wide, 50–75 mm long, and taller as well.
Bring the laser inside and the module grows. The reason is simple: the laser needs space, needs cooling, and adds another alignment step.
Alibaba Cloud's SNPO is another good example. Its single-mode and multimode versions share the same socket, but the single-mode version has one extra light-source interface.
This figure shows two modules for the same socket: the single-mode version on the left has an extra fiber interface for the external light source, and the multimode version on the right does not. The difference is simply where the light comes from.

4.3 The cost: how many channels does one laser feed?
The biggest advantage of an external laser is serviceability: lasers are the components most prone to aging, so putting them in the front panel means they can be swapped directly and kept away from the hot zone next to the ASIC. The two NPO spec cards we saw at CIOE and ECOC, 3.2T (100G per lane, under 23 W) and 6.4T (200G per lane, under 28 W), both listed an external light source.
The price is splitting. In the Open CPX specification, modules with 16, 18, 32 and 36 channels use 4, 6, 8 and 12 laser fibers respectively, so each laser fiber feeds 3 to 4 transmit lanes. In our Open CPX 1.0 teardown (in Chinese) we noted that laser output power plus splitting loss is the hidden bottleneck of external-laser designs.
An internal laser removes the polarization-maintaining fiber and the front-panel slot, giving the shortest optical path. Coherent says its high-power CW lasers for laser-in-package NPO are already shipping millions of units per month. The trade-off is that a failed laser means replacing the whole module, which is exactly where NPO's pluggability pays off.
One line to remember: an external laser buys serviceability; an internal laser buys simplicity.
5. Choice two: PD inside the silicon photonics chip, or a separate die?
5.1 The receive-side choice
The receive side turns light back into electricity. The PD (photodetector) collects the light, and the TIA amplifies the signal.
Integrated Ge PD: a germanium (Ge) layer is grown directly in the silicon photonics process, so the PD sits on the PIC. No extra chip to attach, high channel density, low cost, and alignment is done at the wafer level.
Discrete PD: a separate PD die is made from III-V material (usually InGaAs) and flip-chipped onto the PIC or substrate. InGaAs generally offers better responsivity and dark current than Ge, leaving more margin as speeds rise; the cost is one more attach step, one more alignment, and one more yield step.
5.2 The two approaches differ by one chip
This figure differs from Variant 1 by a single chip: a discrete PD next to the TIA, flip-chipped onto the PIC. Light leaves the PIC waveguide, enters this PD, and is then handed to the TIA.

▲ (Image source: Simple Tech Trend original)
Today's mainstream silicon photonics NPO, such as Alibaba Cloud's 3.2T with its "monolithic silicon photonics transceiver chips", integrates the PD into the silicon photonics chip. Discrete PDs show up more often in designs chasing higher speed or longer reach.
One line to remember: an integrated PD buys density and cost; a discrete PD buys performance margin.
6. One table that breaks down the four structures
Combine the two choices and you get the four figures:
Variant 1 | Variant 2 | Variant 3 | Variant 4 | |
Laser location | External ELSFP | External ELSFP | Internal CoS | Internal CoS |
PD approach | Integrated Ge PD | Discrete PD | Integrated Ge PD | Discrete PD |
Fibers leaving the module | Signal + light source | Signal + light source | Signal only | Signal only |
Chips inside the module | Fewest | + PD | + laser | + laser + PD |
If the laser fails | Swap the front-panel ELSFP | Swap the front-panel ELSFP | Replace the whole module | Replace the whole module |
Module size | Smallest | Small | Larger | Largest |
Main heat sources in the module | Driver/TIA | Driver/TIA | + laser | + laser |
Main challenge | Splitting and PM fiber | + PD attach yield | Laser cooling and lifetime | Cooling + two attach steps |
Examples | Alibaba Cloud 3.2T, show-floor 3.2T/6.4T | High-speed, long-reach designs | Open CPX ILM | Rare |
This is the variant with the most parts: a CoS laser on the back edge of each PIC and a discrete PD beside each TIA. The optical engine is the most self-contained, but cooling, alignment and yield challenges all pile up in one module.

▲ (Image source: Simple Tech Trend original)
One line to remember: the four structures are really a choice of two out of four goals: serviceability, simplicity, cost and performance.
7. The real bottleneck is not the optical engine but where light enters and leaves
Whichever variant you pick, NPO shares three bottlenecks, all about how light gets in and out:
Light source: external designs must solve splitting loss, internal designs must solve cooling and lifetime. Either way, high-power CW lasers are the tightest component in supply.
FAU and fiber interface: aligning the silicon photonics chip to fiber requires sub-micron precision and is one of the biggest yield variables in packaging.
LGA socket and main board: NPO's pluggability depends on the socket, but contact force, PCB warpage and port-to-port drive differences all show up at the system level. In OCP Global Summit 2/6 (in Chinese) we argued that NPO's lock-in sits at the main board and interfaces, not the optical engine.
STT's view: NPO standardization will happen first at the socket and the light-source interface, not in the optical engine itself. Once socket specs (such as Open CPX) and ELSFP specs settle, optical engines become parts that can be price-compared and swapped. If internal lasers ever prove reliable over a full lifetime, Variants 3 and 4 will gain share and ELSFP growth will slow.
8. Next time you see NPO news, ask these three questions
Where is the laser? An external ELSFP means a separate laser market in the front panel; an internal CoS means laser dies go straight into the module. This decides how light-source suppliers ship.
Is the PD integrated or discrete? Integrated means value concentrates in silicon photonics foundries; discrete means III-V PD makers get a share too.
Which socket is it using? OIF, Open CPX, or a proprietary spec? The more standard the socket, the easier it is to swap optical engines, and the bigger the opportunity for component suppliers.
Summary
NPO is not "a slower CPO". Its defining feature is turning the optical engine into a module that can be plugged and replaced on its own, and that is what gives every part inside the module a chance to become an independent market.
Taken apart, the differences between NPO modules come mainly from two choices: laser outside or inside, and PD integrated or discrete. Together they produce four structures, each with its own component demand and challenges.
The signal most worth tracking is how fast ELSFP and socket specs converge: whichever becomes the standard first, its supply chain ramps first.
Want to know which companies sit behind each component? We have compiled NPO's full supply chain into a list covering 15 segments, from the switch ASIC, silicon photonics chips, Driver/TIA, PD, lasers, ELSFP and FAU to the socket and substrate, with each segment split into global, Taiwanese and Chinese suppliers and listed with stock tickers. The full list is in our vocus subscription edition (in Chinese).
References
Alibaba Cloud's All-Optical Scale-up Achieves Key Milestone, Alibaba Cloud Infrastructure, 2026-03-11, https://zhuanlan.zhihu.com/p/2015063025523106648
From ALink to SNPO: Alibaba Cloud defines the industry's first scale-up copper-optical compatible NPO module, C114, 2026-07-13, https://www.c114.com.cn/other/241/a1313796.html
Explain 3.2T NPO Solution: Near-Package Optics for Next-Generation AI Networking, NADDOD, 2026-11, https://www.naddod.com/ai-insights/explain-3-2t-npo-solution-near-package-optics-for-next-generation-ai-networking
Coherent PhotonLink Raises Its TAM to $90 Billion, Futurum, 2026, https://futurumgroup.com/?p=95856
Near-packaged optics gains ground as the industry hedges against co-packaged optics growing pains, Tom's Hardware, 2026, https://www.tomshardware.com/tech-industry/near-packaged-optics-gains-ground-aso-the-industry-hedges-against-co-packaged-optics-growing-pains
Related reading
Our SiPh transceiver primer: six interfaces, core components and industry examples (in Chinese). How the Driver, TIA, PD and FAU work. https://www.simpletechtrend.com/post/sigh_transceiver_block_diagram
NPO is not an appetizer for CPO (in Chinese). Why separable architectures create component markets. https://www.simpletechtrend.com/post/npo-is-not-a-stepping-stone-cioe-ecoc-2026
OCP Global Summit 2/6: NPO's lock-in is on the main board, not the optical engine (in Chinese). Socket, footprint and channel loss. https://www.simpletechtrend.com/post/ocp-global-summit-2026-npo-interface-footprint-socket
Open CPX 1.0 teardown (in Chinese). ELM/ILM dimensions, laser fiber counts and split ratios. https://www.simpletechtrend.com/post/open-cpx-spec-1-0-connector-teardown



Comments